2mm Diamond Fret Crowning File with Oak Handle

Frets need to be rounded to remove the flat tops after levelling, or when you dress frets to remove wear grooves. A rounded fret top is best achieved by using a rounded file !

This is a diamond fret crowning file. A diamond file with a concave profile is mounted in shaped handle made of English Oak.

These files last for many fretboards: diamond is the hardest known substance known and many little diamonds are embedded in a surface plating. As the surface wears new diamonds are exposed. They are equally long lasting on stainless frets and normal nickel silver frets. The file is permanently attached to the handle.

The diamond file itself is 2.0mm wide (we also offer 2.5mm and 3.0mm- please see our other adverts). The file is about 35mm long and is concave to match the fret profile - when in use the file stays on the fret very well, there's no chatter.

An excellent finish results and a fully polished fret is quickly obtained by going through the sandpaper from coarse to fine grit: 800, 1000, 1200, 1500, 2000 and finally 2500 grit - it's only a couple of rubs with each and when you use the spring steel strip to protect the fretboard then the paper glides across the surface of the fret and strip easily

I have geared the design of this so that its comfortable use, economic to produce, but has the full advantages of diamond abrasion. It weighs only about 40 grammes.

As always, before using any type of abrasive tools on a guitar it is recommended suitable masking (such as a fretboard protector strip) is used to protect the fretboard wood and other parts of the guitar.

Dimensions
•  35mm File Length
•  2.0mm File Width
•  100mm Handle Length
•  Fine Grit Diamond File

Features
• Very comfortable to hold file.
• Concave cutting file to match fret profile.
• Diamond files cut equally well when moving forwards or backwards with NO chatter.
• Suitable for Stainless Steel frets.


Diamond Files & Finishing Effort
We have used an Oak handle which we use in many of our other fretting tools. Diamond Files are really the best surfaces developed by mankind for abrasion - the resulting surface is by far the smoothest hand filed surface possible - hence less finishing and polishing!

FREE With This Item
•  A set of sandpaper strips of grits: 800, 1000, 1200, 1500,2000, 2500. (see photo)
•  Spring Steel Fretboard Protector strip to protect your fretboard.
•  Advice sheet on use of this tool
•  A comprehensive guide to fret replacement