These Ebony and Abalone pins where custom made by Chris Alsop. The customer sent a pins to be copied and the resulting specification for the pins was as follows

Top of Cone: 5.6mm
Bottom of Cone: 4.8mm
Cone Length: 23.5mm
Cone Angle: 2 Degrees

Pins  2016-10-01  Id:273  ChrisAlsopGuitar  

Price on Application

These Ebony and Abalone pins where custom made by Chris Alsop. The customer sent a pins to be copied and the resulting specification for the pins was as follows

Top of Cone: 5.6mm
Bottom of Cone: 4.8mm
Cone Length: 23.5mm
Cone Angle: 2 Degrees

Pins  2016-10-01  Id:274  ChrisAlsopGuitar  

Price on Application

These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are 5.7mm diameter under the collar (also known as the top of the cone) and 4.4mm at the base of the cone with a 3 degree taper.
These pins were made for a Faith acoustic guitar.

Pins  2016-09-22  Id:282  ChrisAlsopGuitar  

Price on Application

These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are 5.7mm diameter under the collar (also known as the top of the cone) and 4.4mm at the base of the cone with a 3 degree taper.
These pins were made for a Faith acoustic guitar.

Pins  2016-09-22  Id:283  ChrisAlsopGuitar  

Price on Application

These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are 5.7mm diameter under the collar (also known as the top of the cone) and 4.4mm at the base of the cone with a 3 degree taper.
The original pins were too loose so the customer put some tape around the pin to adjust to the correct size and then sent the pin to us for a template for the new set.
These pins were made for a Faith acoustic guitar.

Pins  2016-09-22  Id:284  ChrisAlsopGuitar  

Price on Application

These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are plain, undecorated on the pin head.
The pins are 6.0mm diameter under the collar (also known as the top of the cone) and 3.8mm at the base of the cone, cone length of 25mm with with a 5 degree taper.

Pins  2016-09-02  Id:285  ChrisAlsopGuitar  

Price on Application

These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are plain, undecorated on the pin head.
The pins are 6.0mm diameter under the collar (also known as the top of the cone) and 3.8mm at the base of the cone, cone length of 25mm with with a 5 degree taper.

Pins  2016-09-02  Id:286  ChrisAlsopGuitar  

Price on Application

These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are plain, undecorated on the pin head.
The pins are 6.0mm diameter under the collar (also known as the top of the cone) and 3.8mm at the base of the cone, cone length of 25mm with with a 5 degree taper.

Pins  2016-09-02  Id:287  ChrisAlsopGuitar  

Price on Application