Diamond File for Chris Alsop Crowning File Systems

This is a ONE additional diamond file to fit our Beech Handle Diamond Crowning File (TF080) or Small Handle Fret Crowning System (TF088). There is an option to purchase this with the handle.

The diamond file has a concave profile

The concave part of the file is about 0.5mm deep. The width of the abrasive surface of the file is as stated i.e. 2mm, 2.5mm or 3mm. The ideal file size is a little smaller than the fret width.
Also by leaning over the fret side a little, so the abrasion is directed where you want it, the file will cope with smaller and bigger frets than the file width.

Dimensions Available
• Fine Grit File
• Choose from File Width : 2.0mm or 2.5mm or 3.0mm

Features
•  The diamond file is concave to match the fret profile. When in use, the file stays on the fret very well and there's no chatter.  Being a diamond file it cuts equally well when moving forwards or backwards.
• An excellent finish results and and a fully polished fret is quickly obtained by going through the sandpaper from coarse to fine grit : 800, 1000, 1200, 1500, 2000, and finally 2500 grit - it's only a couple of rubs with each and when you use the spring steel strip to protect the fretboard then the paper glides across the surface of the fret and strip easily.  Dremel polishing wheels can be used - but be careful as the fret can get very hot very quickly if you stay on it too long with a power tool.
•  When fitted to the handle, the design is geared so maximum visibility is achieved. This is vital to do a good job and so the blade (which holds the file) is only about 3.5mm thick and hence the fret that you are filing can be clearly seen. Also, it is balanced in the middle and is lightweight. This gives the maximum feel to the tool for how the cutting process is progressing. It weighs only about 85 grams.
•  As always, before using any type of abrasive tools on a guitar it is recommended suitable masking is used to protect the fretboard wood and other parts of the guitar.
As with any abrasives used near a guitar - always use adequate shielding of the fretboard, guitar body, pickups, etc

Suitable for Stainless Steel frets.